es

Resistores de carga y descarga

LA RESISTENCIA LIMITADORA DE CORRIENTE PARA SU CONDENSADOR

El resistor de carga es una resistencia limitadora de corriente para la carga y la descarga de condensadores y limita, por ejemplo, la sobrecorriente momentánea de conexión que fluye en el condensador del circuito intermedio.

Para ello, el equipo ha de estar concebido para una energía de impulso individual y una tensión de red elevadas. La inductancia de la resistencia también contribuye a limitar la sobrecorriente momentánea de conexión, por lo cual los resistores bobinados representan la elección acertada.

  • REOHM series 154

    Max. continous power: 200 W

    BW 156
    • Valores de resistencia: 2,2 - 500 Ohm
    • Potencia constante: 50 - 200 W
    • max. operating voltage: 900 V

    The braking resistor REOHM 154 protects the machine from a voltage rise in the intermediate circuit, if an electric machine operates as a generator (Electromotive brake). The current reduces also the speed of the machine. 


    The serie REOHM 154 is available as braking resistor (series BW) or as charging resistor (series R).


    As 154 R (Charging resistor, damping resistor, filter resistance, etc.)


    The charging resistor is a current limiting resistor for the charging and discharging of capacitors and limitates for example the current flowing into the intermediate circuit capacitor inrush current. For this the device must be designed for a high single pulse energy and nominal voltage. The inductance of the resistor contributes to limit the inrush current, so wirewound resistors are the right choice.


    Typical Applications: 



    • Drive Technology

    • Renewable energy

    • Electromobility


     


    Maximum energy with minimum space



    • The compact design enables the use in all applications where
      little space is available (for example in cabinet and frequency converter)

    • Unity-Version can be assem-bled as low-profile and upright

    • In case of failure of resistor, this will become highly resis-tive

    • Test voltage: 2,5 kV AC (at 900 V rated voltage)



    Optional



    • With temperature switch

    • Cover for protection against high surface temperatures



  • REOHM series 155

    Max. continous power: 3.000 W

    BW 156
    • Valores de resistencia: 0,5 - 1440 Ohm
    • Potencia constante: 500 - 3500 W
    • max. operating voltage: 900 - 4200 V

    Due to their high protection class up to IP66, the resistors of the REOHM 155 series are particularly suitable for aggressive environments.Better heat dissipation and better dynamic behaviour of the resistors have been achieved by filling heat conducting material surrounding the wound body. The resistors of the series 155 are available as braking resistors, charging resistors or high-voltage resistors. 


    As BW (Braking resistor)


    When an electric machine operates as a generator (Electromotive brake), the braking resistor protects the machine from a voltage rise in the intermediate circuit. The current reduces als the speed of the machine. 


    As R (Charging resistor, damping resistor, filter resistance, etc.)


    The charging resistor is a current limiting resistor for the charging and discharging of capacitors and limitates for example the current flowing into the intermediate circuit capacitor inrush current. For this the device must be designed for a high single pulse energy and nominal voltage. The inductance of the resistor contributes to limit the inrush current, so wirewound resistors are the right choice.


    As high-voltage resistors


    REO high-voltage resistors are designed, produced and certified especifically for the railway technology. The specially designed winding technology allows a higher withstand voltage due to the spatial separation of the wires. The use of railway-compatible and high quality materials, together with the complete encapsulation in profile design allows protection ratings up to IP66. 


    Maximum energy with minimum space



    • This unit is very compact with high power

    • Suitable for IP 65 applications

    • Capacity can be doubled by fan that is provided with screw thread

    • In case of failure of resistor, this will become highly re-sistive

    • Test voltage: 2,5 kV AC (at 900 V rated voltage)



    Optional



    • With temperature switch

    • Cover for protection against high surface temperatures

  • REOHM series 155 - Combination

    Max. continous power: 30.000 W

    BW 156
    • Valores de resistencia: 0,8 - 820 Ohm
    • Potencia constante: 4000 - 30000 W
    • max. operating voltage: 900 V

    As BW (Braking resistor)


    When an electric machine operates as a generator (Electromotive brake), the brake resistor protects the machine from a voltage rise in the intermediate circuit. The current reduces als the speed of the machine. 


    As R (Charging resistor, damping resistor, filter resistance, etc.)


    The charging resistor is a current limiting resistor for the charging and discharging of capacitors and limitates for example the current flowing into the intermediate circuit capacitor inrush current. For this the device must be designed for a high single pulse energy and nominal voltage. The inductance of the resistor contributes to limit the inrush current, so wirewound resistors are the right choice.


     


    Maximum energy with minimum space



    • This braking resistor of the REOHM series is very compact with high capacity

    • Maximum energy is provided in smallest space and very high protection rating

    • The resistor is to be as-sembled vertically with the terminal box at the bottom

    • Sufficient convection is to be ensured

    • Ratings higher than 22kW require a separate terminal box

    • Test voltage: 2,5 kV AC (at 900 V rated voltage

    • Ambient temperature: -10...+40°C

    • Max. temperature: >300°C



    Optional



    • With temperature switch

    • Cover for protection against high surface temperatures



  • REOHM series 156

    Max. continous power: 1.500 W

    BW 156
    • Valores de resistencia: 1 - 1000 Ohm
    • Potencia constante: 400 - 1500 W
    • max. operating voltage: 1000 V

    Resistances of REOHM Series 156 are characterized by their high power density with a small mounting area. Due to their high degree of protection up to IP66  they can be used even in particularly aggressive environmental conditions  (eg salt spray). The resistors are available as braking resistors , charge-, attenuation,- and filter resistors or as UL version.


    As BW (Braking resistor)


    When an electric machine operates as a generator (Electromotive brake), the brake resistor protects the machine from a voltage rise in the intermediate circuit. The current reduces als the speed of the machine. 


    As R (Charging resistor, damping resistor, filter resistance, etc.)


    The charging resistor is a current limiting resistor for the charging and discharging of capacitors and limitates for example the current flowing into the intermediate circuit capacitor inrush current. For this the device must be designed for a high single pulse energy and nominal voltage. The inductance of the resistor contributes to limit the inrush current, so wirewound resistors are the right choice.


    As UL version


    In addition to the high protection class IP66, the profile resistors REOHM 156 are also UL-certified and have a power of 50W up to 7.500 W (as combination).


     


    Maximum energy with minimum space



    • This unit is very compact with high power

    • In case of failure of resistor, this will become highly resistive.

    • Suitable for IP 66 applications

    • Test voltage: 2,5 kV AC (at 900 V rated voltage)


    Optional



    • With temperature switch

    • Cover for protection against high surface temperatures



  • REOHM series D 158

    Max. continous power: 60.000 W

    BW 156
    • Valores de resistencia: 2,5 - 850 Ohm
    • Potencia constante: 1000 - 60000 W
    • max. operating voltage: 1000 V

    The series D 158 can be used as braking or load resistor for drive technology, industrial applications, test fields, E-Mobility and railway engineering with integrated water cooling. Thanks to localised, optimised cooling, high outputs can be generated in the smallest space with low heat generation. It is also possible to deploy it in areas with high ambient temperatures.


    The resistors are available as braking-, load-, or highvolt resistors.


    Applications:



    • Drive technology, frequency converters

    • Railway

    • E-Mobility

    • Test systems


     


    Maximum energy with minimum space



    • Protection IP20 up to IP66

    • Test voltage 2,5 kV AC

    • Ambient temperature: -15 to +80ºC

    • Other fixing points or power ratings on request



    Optional



    • With temperature switch


     

  • REOHM series NTT R D 158

    Max. continous power: 2600 W

    BW 156
    • Valores de resistencia: 0,1 - 1 Ohm
    • Potencia constante: 100 - 1210 W
    • max. operating voltage: 4200 V

    The resistor NTT RD 158 is a water-cooled damping resistor, which is used for traction in railway applications. The resistor is used in series with filter capacitors in the 1.5 kV and 3 kV DC network. 


    For this purpose, the device must be designed for a high single pulse energy and nominal voltage. The inductance of the resistor contributes to limit the inrush current - here are wirewound resistors the right choice.


    The advantage of the resistance unit NTT R D158 is that 4 damping resistors are housed in one unit. This means a compact construction and low cost when connecting the resistor.


    REO high-voltage resistors are designed, produced and certified specifically for the railway technology. The specially designed winding technology allows a higher withstand voltage due to the spatial separation of the wires. The use of railway-compatible, high quality materials, together with the complete encapsulation in profile design lead to protection classes up to IP 65.


    Maximum energy with minimum space



    • Continuous output: 2600 W

    • Max. operating voltage: 4200V

    • Resistance value: 0,1 - 1Ohm

    • Average pulse load: 1x per hour 20kWs - within 100ms

    • Maximum pulse load: 20x per year 120kWs -within 20ms

    • Protection class: IP00-IP65

    • Other ratings upon request


  1. página:
  2. 1
  3. 2

Descargas

  • Descargar
    Protection Ratings
    pdf

    Protection Ratings

    Discover our brochure about high protection ratings!
    Descargar
  • Descargar
    components for wind power generation
    pdf

    components for wind power generation

    REO components for wind power generation Safe application for onshore and offshore installations
    Descargar