es

Transformadores de regulación

TRANSFORMADORES DE REGULACIÓN REO: FORMA SINUSOIDAL INVARIABLE EN TODAS LAS APLICACIONES

Un transformador de regulación se utiliza cuando es necesario ajustar tensiones de salida
con forma sinusoidal invariable.

Los transformadores de regulación REO no generan perturbaciones u ondas armónicas y, por lo tanto, están especialmente indicados para el uso
en campos de ensayos o institutos de investigación donde las perturbaciones de alta frecuencia pueden distorsionar los resultados.

  • REOLINE Plus DC-S/A

    REOLINE Laboratory Power Supplies (analog, auto-windings)

    REOLINE Plus DC-S/A
    • Tensión nominal: 230 V
    • Corriente de salida: 0,60 - 8 A
    • Tensión de salida: 0 - 200 V
    • Potencia de salida: 120 - 1600 W

    This portable power supply is a single-phase direct current supply unit with analog display, auto-windings and continuously adjustable output voltage of 0 ... 200 VDC.
    The absolute zero position causes the zero voltage state.


    Applications:



    • Laboratory

    • Test field

    • Factory and service applications

  • RTE 230 V

    Single-phase variable column-type transformers (auto windings, open, IP 00)

    RTE 230 V
    • Tensión de entrada: 230 V
    • Tensión de salida: 230 V
    • Corriente de salida: 13 - 435 A

    The REO column-type variable transformers complement the REOVAR series for currents up to 1000A with a fine-step adjustment of the output voltage at a constant current at the output.


    The waveform of the sine wave is preserved - like that,  EMC problems cannot occur over the entire operating range of 0 - 1000A. All products in the series come with UL - listed materials .


    The REO construction enables easy handling of the carbon rolls and the spindle - the copper-bevel gear allows a hysteresis-free adjustment of the output voltage even at high adjustment speed of the drive motor. Thus REO variable column transformers are perfect for high performance adjustment .


    REO-column type variable transformers conform to EN 61558-2-14


     

  • DRTE

    Three-phase variable column-type transformers (auto windings, IP 00)

    DRTE
    • Tensión de entrada: 400 V
    • Tensión de salida: 400 V
    • Corriente de salida: 8,7 - 208 A

    The REO column-type variable transformers complement the REOVAR series for currents up to 1000A with a fine-step adjustment of the output voltage at a constant current at the output.


    The waveform of the sine wave is preserved - like that,  EMC problems cannot occur over the entire operating range of 0 - 1000A. All products in the series come with UL - listed materials .


    The REO construction enables easy handling of the carbon rolls and the spindle - the copper-bevel gear allows a hysteresis-free adjustment of the output voltage even at high adjustment speed of the drive motor. Thus REO variable column transformers are perfect for high performance adjustment .


    REO-column type variable transformers conform to EN 61558-2-14


     

  • RTEU 230 V

    Single-phase variable column-type transformers (auto windings, double brush systen, IP 00)

    RTEU 230 V
    • Tensión de entrada: 230 V
    • Tensión de salida: 230 V
    • Corriente de salida: 13 - 435 A

    REO columns variable transformers with double brush system together with REO transformers are the perfect solution - the double performance is possible .


    The waveform of the sine wave is preserved - like that,  EMC problems cannot occur over the entire operating range of 0 - 1000A. All products in the series come with UL - listed materials .


    The REO construction enables easy handling of the carbon rolls and the spindle - the copper-bevel gear allows a hysteresis-free adjustment of the output voltage even at high adjustment speed of the drive motor. Thus REO variable column transformers are perfect for high performance adjustment .


    REO-column type variable transformers conform to EN 61558-2-14


     

  • DRTEU

    Three-phase variable column-type transformers (auto windings, double-brush system)

    DRTEU
    • Tensión de entrada: 400 V
    • Tensión de salida: 400 V
    • Corriente de salida: 8,7 - 208 A

    REO columns variable transformers with double brush system together with REO transformers are the perfect solution - the double performance is possible .


    The waveform of the sine wave is preserved - like that,  EMC problems cannot occur over the entire operating range of 0 - 1000A. 
    All products in the series come with UL - listed materials .


    The REO construction enables easy handling of the carbon rolls and the spindle - the copper-bevel gear allows a hysteresis-free adjustment of the output voltage even at high adjustment speed of the drive motor. Thus REO variable column transformers are perfect for high performance adjustment .


    REO-column type variable transformers conform to EN 61558-2-14


     

  • REOVAR RRT/RRTW

    Single-phase toriodal variable transformers (auto windings, open, IP 00)

    REOVAR RRT/RRTW
    • Tensión de entrada: 230 V
    • Tensión de salida: 0 - 230 V
    • Corriente de salida: 1 - 32 A

    REOVAR toroidal transformers from the market leader for variable transformers regulate the output voltage in fine steps at constant current at the output. Our toroidal transformers are suitable for frequencies of 50 - 400 Hz - other frequencies on request.


    The particular advantage of this series is to maintain the sinusoidal shape - like that, EMC problems cannot occur. The special winding core of REO produces no stray fields and low voltage case .


    Type RRT/RRTW with an adjustable spindle to allow table or wall mounting. Sizes M4 - M61 have an optional center fixing nut.



    • Input voltage: 230 V 50/60 Hz

    • Output voltage 0-230 V oder 0-260 V

    • Ambient temperature max. 40° C

    • Connection group IO


     


    REO toroidal variable transformers conform to EN 61558-2-14

  1. página:
  2. 1
  3. 2

Descargas